Tamiya 1/35 Horch Type 1A

Adding… The item has been added
  • Next working day delivery on this item
  • Free Click & Collect from our store
Model Number:
Military Vehicles
World War Two
Unassembled (Kit)

The Tamiya 1/35 Horch Type 1A from our 1/35 scale military vehicle model kits range range accurately recreates the real-life German truck used to tow field guns and carry ammunition during World War II. This plastic model kit requires paint and glue to complete.

As the Reichswehr of the 1920's was very much limited both in size and scope by the terms of the Versailles Treaty, and as the economic situation did not, in any case, allow lavish spending on equipment, most of the transport needs of the army were met by using adapted commercial vehicles. Most widely used of all vehicle types, because they were cheap and very mobile, were personnel carriers based on commercial car chassis fitted with a simple open body of the type known as the Kubelsitzer (literally "bucket-seater"). This type of vehicle, as the name implies, consisted of little more than the chassis and normal front end, as in the normal motor car, with sturdy metal backed seats secured to the chassis frames. Folding canvas screens took the place of doors, and there was a canvas cover, as in a sports car, to be erected in foul weather. Though cross-country performance was very limited, the style of the vehicle was something of a trend setter and small utility personnel carriers have since become common equipment in all armies. To improve on cross country ability, these early "Kubelwagens" had large section tyres, strengthened springs, and lower axle ratios than their commercial equivalents. During the 1930's, this type of vehicle saw ever wider use with the German army and was one of its most characteristic and distinctive types. These "Kubelwagens" were used as light gun tractors, staff cars, radio cars, command cars, artillery survey vehicles, and signal line layers, as well as serving as personnel carriers for motorized units. Trials held in 1930 had established that the car chassis made by Daimler-Benz, Adler and Wanderer were the best, and these makes predominated in service. From 1933, when the National Socialist took power and began overt re-armament of the German forces, there was an expansion on an increasing scale with mechanisation of the greatly enlaged army among priority schemes. At that time the various cars on adapted commercial chassis were categorised as follows: Leichte Personnenkraftwagen (light passenger car) approved makeup to 1500cc engine capacity. Mittlerer Personenkraftwagen (medium passenger car) approved make up to 3,000cc engine capacity. Schwerer Personenkraftwagen (heavy passenger car) approved make up to 3,000cc engine capacity. The light passenger car types were each given a designation according to their intended purpose. Thus Kfz (kraftfahrzeug) 1 was the designation for the basic light personnel carrier; Kfz 2 designated a light signals car (Kraftkahrzeug motor vehicle). The medium vehicles were designated similaryly from Kfz 11 upwards according to function. In the heavy class only the Kfz 21 heavy cross country personnel carrier was produced, as this was the last type to be approved and ordered. It entered service in 1937 and was based on the Auto-Union/Horch EFm chassis, remaining in production until 1940 (after Austria was annexed, the Steyr 1500A was also built to this "heavy" requirement, however also designated Kfz 21). The Auto-Union/Horch EFm model had a V-8 80 hp engine and four wheel drive. Because of its length it had three rows of two seats, seating six men in all. Spare wheels were carried on the side panels flanking the first and second rows of seats. The ordinary commercial tourer car on which the military "kubelwagen" a senior officer's staff car. The Kfz 21 was described in German as the "Schwerer gelandegangiger personenkraftwagen (6-sitzer)" heavy cross country passenger car (6 seater). It had the normal sort of open Kubelsitzer body and a folding canvas top. Overall length was 15 ft 11 inches.

Manufacturer: Tamiya
Model: 35052 German Horch Type 1A Ltd
Scale: 1/35

Wonderland Models deliver throughout the UK and Overseas. We endeavour to dispatch orders immediately but certainly within 48 hours of receipt. Orders will only be dispatched once payment has been received.

UK Delivery:

Order value (Including postage) Delivery Cost and Type
Up to £70.00 £4.99 - First Class Royal Mail
(Delivery Within 1-5 Days)
Over £70.00 £7.99 - DPD £7.99
(Courier Delivery Next Working Day)

Please be sure to give us your mobile phone number when ordering as DPD offer an email/text message option to enable you to receive notification of despatch and estimated delivery time. The express service requires a signature on delivery and must be ordered before 2pm for next working day delivery. The courier does not deliver on a weekend or bank holidays.

Express delivery is two days to some postcodes, and these incur a £6 surcharge. A list of applicable postcodes can be seen here.

Overseas Delivery:

European deliveries are sent by DPD. For details of delivery costs and times by country please click here.

For full shipping details please see the delivery section of our website here.