E-Flite Blade CX3 Radio Control Helicopter
In addition to the 2.4GHz DSM2 5-channel transmitter and 4 AA batteries,
the Blade CX3 also includes a rechargeable 2S 7.4V 800mAh Li-Po battery pack
with charge protection circuitry, DC Li-Po balancing charger and an AC charger adapter.
The E-Flite Blade CX3 MD 520N RTF gives rc helicopter pilots unbelievable micro-heli excitement.
The CX3 includes a radio system equipped with Spektrum 2.4GHz DSM2 technology
in the LP5DSM transmitter and Spektrum AR6100e receiver, providing 5-channel control
with interference free flying. The Blade CX3 is covered in the licensed MD 520N scale body with
an attractive police trim scheme.
Just like its predecessor the Blade CX2, the Blade CX3 radio control helicopter offers first-time heli pilots exceptional stability and incredible control through the coaxial, counter-rotating head design
and 3-in-1 control unit. In addition, this CX3 also features two feather-light S60 Super Sub-Micro servos that provide full cyclic movement of forward, backward and side-to-side maneuverability.
The Blade CX3 also includes a heading lock gyro to provide better control and locked-in performance. As with other co-axial Blade helicopters, no flying experience is required to begin your heli flight with the Blade CX3.
This indoor helicopter is 100% factory-assembled, test flown and ready to fly out of the box, no assembly or setup required-and nothing left to buy.
The Blade CX3 is the first coaxial rc helicopter to incorporate a heading lock gyro, a Spektrum DSM2 2.4GHz radio system and a scale body all in one convenient ready-to-fly package.
Advanced 3-in-1 control unit including main motor ESCs, mixer and heading lock gyro
The heading lock gyro in the CX3 offers incredible hold and control to maximize your flight experience.
Interference free 5-channel E-flite transmitter with built-in Spektrum 2.4GHz DSM2 technology
Lightweight Spektrum AR6100e receiver with DSM2 technology
Two feather-light S60 Super Sub-Micro servos--just 6.0 grams each
DC Li-Po balancing charger and convenient AC adapter
2S 7.4V 800mAh Li-Po battery pack with charge protection circuitry
Co-axial, counter-rotating rotor blades that make hovering easy for first-time pilots
100% factory assembled and test flown, no assembly or difficult setup required
Compatible with most Blade CX2 option parts
See a Video Clip Here
Main Rotor Diameter: 13.6 in (345mm)
Gross Weight: 8.0 oz (227g) w/battery
Length: 16.4 in (415mm)
Motor Size: 180 Brushed (2 installed)
Control System: E-flite LP5DSM Transmitter
Instructional Video Part 1
Instructional Video Part 2
Model: EFLH2000UKM2 Blade CX3 MD 520N RTF (Mode 2)
Blade CX3 Manual