Image
  1. Home
  2. Radio Control
  3. RC Helicopters
  4. E-Flite Helicopters

Blade mSR RTF (Mode 2) RC Helicopter - EFLH3000iM2

E-Flite
E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  1. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  2. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  3. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  4. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  5. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  6. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  7. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  8. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image
  9. E-Flite Blade mSR RTF (Mode 2) RC Helicopter Image

Blade mSR RTF (Mode 2) RC Helicopter

Manufacturer: E-Flite
Model: EFLH3000iM2
Our price: £115.69
$
Excl. VAT: £98.46 RRP: £129.99 Discount: 11% off

E-Flite Blade mSR RTF (Mode 2) RC Helicopter Description

The Eflite Blade mSR is "next step" ultra-micro heli for coaxial pilots, the single rotor, ultra-micro helicopter weighing in at less than one ounce ready to fly. Completely factory assembled and flight tested you can be in the air with this agile heli in the time it takes to charge the first battery.

Watch video

Watch video

And once that flight is over because the included charger can handle four batteries, and the heli is supplied with two, you can just carry on flying!


Designed from the ground up and building on the earlier success of the Blade mCX and mCX S300, this great little heli really takes the ultra-micro concept to the next level. With a compact 180mm rotor span, the mSR provides pilots with an awesome level of performance and excitement with its increased agility and speed over co-axial micros.

A unique rotor head design provides the same inherent stability of traditional co-axial (twin-rotor) helicopters, but thanks to a fixed-pitch bell-hiller design the mSR can deliver a much more responsive and spirited performance. The kind of performance that would normally only be associated with larger single-rotor models.

  • Perfect for anyone who has flown a Blade CX3 or mCX.
  • 100% factory-assembled, test-flown and ready-to-fly.
  • Unique rotor head design provides nimble response plus positive stability.
  • Includes 4-channel 2.4GHz DSM2 transmitter mode 2.
  • Includes 4-Port charger that charges four batteries at once, plus AC adapter.
  • Includes TWO flight batteries for more flying times.
  • Factory-installed 5-in-1 control unit that combines DSM2 receiver, motor.
  • ESCx, mixer, gyro and servos.
  • Incredibly durable and weighs less then one ounce.
  • Full line of replacement and option parts available.

Manufacturer: Eflite
Model: EFLH3000iM2 Blade mSR RTF

 

Send to a friend

Reviews

E-Flite Blade mSR RTF (Mode 2) RC Helicopter 5
Average rating: 5 Star Rating 5
  • E-Flite Blade mSR RTF (Mode 2) RC Helicopter 28th January 2010
    5 Star Rating 5 Reviewed by: Mark D.

    Great little flyer

    This little machine is, in my opinion a cracker. Small, light and manoeuverable. It will zip along with ease once you have mastered the basics both indoors and outside (on a calm day.).
    Here are a few of my experiences to add to the plethora of information readily available.

    Battery life is good they are small and thus recharge time quick . (I would recommend getting a couple more spare batteries to add to the 2 you get in the kit. The charger after all can charge 4 at once.)

    Beginners – definitely get the training set . You wont need it long but will save on replacing the skids. Due to its lightness the skids will fail.

    I have found that heavy landings cause them to flex outwards causing breaks/shears in the upper front arm area. The arm area can be reinforced with some cotton thread and a dab of super glue to set the cotton( think figure 8 binding) . Also you can stop the flexing with a thin strip of cotton / tape between the skids.

    Spares are readily available and not expensive I would recommend the tail fin and skids as essential spares. Blades are durable and robust and so far for me have not needed replacing.

    Should you wish for finer control of the heli then I would go for a higher quality handset/transmitter. eg Dx5i, Dx6i.or any spektrum 2.4Ghz 4+channel compatible.

    All in all a great machine and good value fun.

  • E-Flite Blade mSR RTF (Mode 2) RC Helicopter 18th January 2010
    5 Star Rating 5 Reviewed by: Jean v.

    Blade MSR - Bullet Proof!

    I've had the MSR for about a month now. I've managed to fly into everything without any major problems! walls, ceilings, my TV, my wife - OUCH! even a pot of water and it survived (I almost cried) with only a few minor fixes..

    As for value for money, its awesome! Parts are cheap too..

    If you are a beginner I suggest buying the training gear. The skids break easily, so even if you are a great pilot, I would suggest investing in a few extras.

    Dont buy any of the glow in the dark parts, they are really brittle!! one crash and they are toast!

    Incredibly tough helicopter, difficult to fly but good for those who are wanting to get into 3D helis.

    Hope this helps!

  • E-Flite Blade mSR RTF (Mode 2) RC Helicopter 24th October 2009
    5 Star Rating 5 Reviewed by: graham s.

    blade msr

    Highly controllable. With a little practice can be flown throughout the house with ease. Has survived lots of crashes. For people looking for the next step up from picooz rc helis this is the one to get.

Read all 5 reviews
Developed by mercurytide
Company registration number: SC049931 Wonderland (Toys) Limited, 97 Lothian Road, Edinburgh, Midlothian, EH3 9AN