Hornby Railways BR 2-10-0 Crosti Boiler 9F Class Locomotive
Brand: Hornby Railways
Model Number: R3356
The BR 2-10-0 Crosti Boiler 9F Class (Early BR) Heavily Weathered in the Hornby Railroad Range of Locomotives accurately recreates the real life loco in stunning detail.
The BR Class 9F was born out of the need for British Railways requirement for a heavy freight locomotive and was part of their standardisation plan. By 1954 the first 20 Class 9F locomotives had been introduced, however with coal economies in mind it was decided as an experiment that the next 10 of the Class to be built should be built using Franco-Crosti boilers.
Named after two Italian engineers who had worked for the Italian State railway in the 1930s, the Franco-Crosti boiler was a modification of the more conventional fire tube boiler, which was used on the majority of steam locomotives. Different from the more common type of boiler, the heat that remained in the exhaust gasses was used to preheat the water supply for the main boiler by using a secondary heat exchange system. The heat exchange system was in effect a secondary boiler. From there the preheated water was fed at full boiler pressure into the main boiler. The feedwater heater as it was known was not designed to produce steam but to raise the temperature of the water allowing the heater to maximise the remaining energy in the exhaust gasses more efficiently.
The Franco-Crosti system had proved quite successful in Italy and Germany and so in 1955 the 10 experimental 2-10-0 locomotives which had slightly smaller boilers than the standard 9Fs were fitted with a single feedwater heater located underneath the main boiler. The familiar 9D funnel was retained, however it was only used for “firing up” after which it was blanked off when the locomotive was operating. The actual Crosti chimney was located on the right side of the locomotive slightly forward of the firebox.
Unfortunately the Crosti design did not show a particularly marked improvement in operation and proved to be a concern in respect of maintenance due to the acidic flue gasses condensing in the feed water heater with the inevitable result of corrosion. After further test using the standard and more conventional 9Fs as a comparison, the small improvements in efficiency when compared against the additional costs of fitting the system, plus payments to Crosti and the fact that the locomotives were slightly less powerful, the decision was made to remove the system and convert the locomotives to a standard type boiler. However, even after conversion the ten affected locomotives still retained their smaller boilers.
Model: R3356 BR 2-10-0 Crosti Boiler 9F Class (Early BR) Heavily Weathered
Write a review
Wonderland Models deliver throughout the UK and Overseas. We endeavour to despatch orders immediately but certainly within 48 hours of receipt. Orders will only be dispatched once payment has been received.
Order value (including postage) up to £70: First Class Royal Mail £3.95 (Delivery Within 1-5 Days)
Order value (including postage) over £70: Interlink Express £6.95 (Courier Delivery Next Working Day).
Please be sure to give us your mobile phone number when ordering as Interlink Express offer an email/text message option to enable you to receive notification of despatch and estimated delivery time. The express service requires a signature on delivery and must be ordered before 2pm for next working day delivery. The courier does not deliver on a weekend or bank holidays.
Express delivery is two days to some postcodes, and these incur a £6 surcharge. A list of applicable postcodes can be seen here.
European deliveries are sent by Interlink Express/DPD. For details of delivery costs and times by country please click here.
Delivery to Australia, New Zealand, Canada, Japan and the USA is by Royal Mail or FedEx courier and is calculated on an order by order basis based on weight and size. We will contact you with the shipping costs on receipt of the order.
For full shipping details please see the delivery section of our website here.