Image
  1. Home
  2. Radio Control
  3. RC Planes

Vapor RTF Etomic Radio Control Plane - PKZ3300

Parkzone
Parkzone Vapor RTF Etomic Radio Control Plane Image
  1. Parkzone Vapor RTF Etomic Radio Control Plane Image
  2. Parkzone Vapor RTF Etomic Radio Control Plane Image
  3. Parkzone Vapor RTF Etomic Radio Control Plane Image
  4. Parkzone Vapor RTF Etomic Radio Control Plane Image
  5. Parkzone Vapor RTF Etomic Radio Control Plane Image
  6. Parkzone Vapor RTF Etomic Radio Control Plane Image
  7. Parkzone Vapor RTF Etomic Radio Control Plane Image
  8. Parkzone Vapor RTF Etomic Radio Control Plane Image

Vapor RTF Etomic Radio Control Plane

Manufacturer: Parkzone
Model: PKZ3300
Our price: £93.49
$
Excl. VAT: £79.57 RRP: £109.99 Discount: 15% off

Parkzone Vapor RTF Etomic Radio Control Plane Description

The Parkzone Vapor RTF Etomic is a radio control plane that can be flown almost anywhere, in a living room, a basement or even a garage.

This rc aircraft features the Spektrum DSM2 radio technology eliminating interference so you can fly multiple planes at the same time.
The Vapor Etomic is ready to fly right from the box with everything you need included inside even the batteries for the controller.
The Single-cell Li-Po charger safely and conveniently charges the battery in approximately 20 minutes. The throttle, rudder and elevator provide true 3-channel flight and manoeuverability.
The Vapor is fully proportional with super lightweight servo motors with feedback potentiometers give you precise control.
The fuselage and tail/wing framework made of lightweight carbon and the wing and tail surfaces covered in lightweight and durable PET film.

About the Vapor Etomic RTF
The remarkable DSM2 radio technology makes the ready to fly Vapor a plane just about anyone can pilot with confidence.

Specifications
  • Wing Span: 14.75 in (375mm)
  • Overall Length: 15.25 in (387mm)
  • Flying Weight: 0.4 oz (12g)
  • Radio: 3-channel 2.4GHz w/Spektrum DSM2 technology (included)
  • CG (center of gravity): Front wing mount 23mm back from front edge of fuselage; battery tray 13mm back from front wing mount
  • Recommended Battery: 3.7V 70mAh Li-Po battery (included)
  • Charger: DC single-cell Li-Po
  • Minimum Age Recommendation: 14 years
  • Experience Level: Intermediate Recommended
  • Environment: Indoor Assembly Time: Less than 1 Hour
  • Is Assembly Required: No
Manufacturer: Parkzone
Model: PKZ3300 Vapor Etomic RTF Radio Control Plane

See a video clip here

Send to a friend

Reviews

Parkzone Vapor RTF Etomic Radio Control Plane 1
Average rating: 4 Star Rating 4
  • Parkzone Vapor RTF Etomic Radio Control Plane 17th April 2009
    4 Star Rating 4 Reviewed by: Alan T.

    Vapour RTF Etomic Radio Control

    Have flown model about 10 times. Can now fly around room 4m x 4m. Platic wing needed sticking to frame in a few places. Broke pivot on horizontal stabilizer. Temporary repair with shrink tubing (bought new) but repair still in place.Broke main wing front support, stuck & braced with length cut from spare pushrod. Super glue & plastic glue did not hold, used Araldite.The areas could be strengthened with no weight penalty.Battery drops out on every landing. Now wired in. Holder should be mounted other way up.
    Use packing box as launch site from top of cupboard. It has certainly improved my reactions. Great fun.

Developed by mercurytide
Company registration number: SC049931 Wonderland (Toys) Limited, 97 Lothian Road, Edinburgh, Midlothian, EH3 9AN