Tamiya 1/10 Enzo Ferrari 58302

The Tamiya Enzo Ferrari is a 1/10th scale RC car based around the popular TT-01 chassis. The longitudinally placed motor allows reliable power transmission through a shaft-driven 4WD transmission. Mechanism and battery are loaded in the bathtub chassis in a flat position for greater stability. Low center of gravity and 4-wheel double wishbone suspension insure top control of this radio control car.
Many seperately available option parts can be mounted on the Enzo Ferrari TT-01 chassis such as full ball bearings and CVA Mini Shock Unit Cylinder. These parts will enhance the performance of your R/C car. Try your own original setting.

Electric Kits Require:
(unless stated differently above)
Radio: 2-Channel with servo(s)
Battery: 6-cell flat with standard Tamiya connector
Charger: AC/DC timed or peak for 6-cell battery
Paint: PS for Polycarbonate/TS for ABS
Misc. Items: Building equipment

Manufacturer: Tamiya
Model: 58302 Enzo Ferrari
Scale: 1/10

Tamiya Enzo Ferrari Specifications
Total length: 457mm
Total width: 202mm
Total height: 110mm
Total width: 202mm
Clearance: 9mm
Weight Fully-Equipped: 1,490g (Measurement includes TP-S3003 servo, CPR Unit and RC2400SP Battery with RS-540 motor)
Wheelbase: 257mm
Tread F/R: 159/157mm
Chassis Shape: Bathtub
Steering Tie Rod: 3 part
Suspension: Front and Rear Double Wishbone
Caster Angle-F/R: 2deg/0deg
Camber Angle-F/R: 1deg/1deg
Toe Angle-F/R: 0deg/0deg
Damper: F/R Friction Damper
Transmission Type: Longitudinally placed motor with Shaft-Driven 4WD
Gear Ratio: 8.35:1 (standard in the kit)
Diff. gear system: F/R 3-Bevel Diff
Speed Controller: Electronic Speed Controller (CPR Unit)
Tire Width: F/R both 27mm
Tire Diameter: F/R both 65mm
Tread Pattern: F/R Racing Radial Type
Type 540 motor included